JVC Exad KD-ADV38 Instructions Manual page 344

Using the Bluetooth cellular phone
POWER]ON
Dial Menu
Press: Display <
Answer incoming call
Redial
Hold: Display < > list
~
Select "Bluetooth Phone."
Ÿ
Enter the <Bluetooth> menu.
!
Establish the connection with a device,
then make a call (or settings using the
<Bluetooth> menu).
☞ pages 32, 45, 53, and 54
When the sound is stopped or interrupted during
the use of a Bluetooth device, try the following
remedies.
• Turn off, then turn on the unit.
• (When the sound is not yet restored,) connect the
device again. (☞ "Connecting/disconnecting a
registered device" on page 33)
When a call comes in...
Name and phone number (if acquired)
The source is automatically changed to "Bluetooth
Phone".
When <Auto Answer> is activated...
The unit answers the incoming calls automatically.
(☞ page 54)
• When <Auto Answer> is deactivated, press any
button (except ATT or +/–) to answer the
incoming call.
Adjust the volume
Turns Blue when the Bluetooth device is connected.
Bluetooth Phone
Connected Device Name
>
* 1
FLAT
3: 45
Status of the device
Signal strength/Battery remainder
* 1
You can adjust the volume level for "Bluetooth Phone"
without affecting the volume level for other sources.
* 2
Appears only when the information comes from the
device.
Each time you press 5 ∞, the registered device
* 3
name (and "NEW DEVICE" when a new device can be
registered) appear in turn.
4
*
When a cellular phone with audio function is
connected, appears.
You can adjust the microphone volume level. (☞ page
54)
To end the call or reject an incoming call
Hold any button (except
Answering a waiting call
If your cellular phone is equipped with the call waiting
function, you can put the current call on hold and
answer the waiting call.
Press any button (except
• To restore the on-hold call, press any button (except
ATT and +/–) again.
• When you end one call, you can connect to the
other.
34
☞
Connected
device name
* 4
PM
2
*
ATT or +/–).
ATT and +/–).
page 43
* 3