JVC Exad KD-ADV38 Instructions Manual page 212

Menu items
Speaker Level
Select the
speaker
Adjust the speaker
level
Speaker Distance*
Select the
speaker
Adjust the speaker
distance
AF Regional
TA Volume
Program Search
IF Band Width
9
DAB AF*
* 6
This subwoofer level setting takes effect only when surround is activated. (☞ also page 24, 25)
* 7
This setting does not take effect for MPEG1/MPEG2 and DivX with MP3 audio track.
* 8
Depends on the amplifier gain control. (☞ page 56)
9
* Appears only when DAB tuner is connected.
Selectable settings, [reference page]
You can adjust the output level of the activated speakers
(☞ <Speaker Size> on page 53), monitoring the test tone.
Front Lch/Center Ch/Front Rch/Rear Rch/Subwoofer*
: adjust the output level of each speaker in the range of –10dB to
+10dB; Initial 0dB.
• Press and hold ENT to turn on and off the test tone.
7
You can adjust the speaker output timing.
Front Lch/Center Ch/Front Rch/Rear Rch/Rear Lch : adjust the
speaker distance from the listening position in the range of
15cm/6 inches to 600 cm/240 inches in 15 cm/6 inch step;
Initial 120 cm/48 inch (for center speaker), 150 cm/60 inch (for
other speakers).
• Press and hold DISP to change the measuring unit—cm and inch.
When the received signals from the current station become weak...
Off : Cancels—not selectable when <DAB AF> is set to <On>.
AF Regional : Switches to another station broadcasting the same
programme. The REG indicator lights up.
AF : Switches to another station. The programme may differ from the
one currently received (AF indicator lights up), ☞ [14].
00 to 30 or 50*
Off, On, ☞ [14]
Auto : Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
Wide : Subject to the interference from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
Off, On, ☞ [44]
, Initial 15, ☞ [13].
8
54
6
/Rear Lch