Operations On Dvd Deck; Basic Playback - JVC HR-XV38SAG Instructions Manual

OPERATIONS ON DVD DECK

Basic Playback

● Turn on the TV and select the VCR channel (or AV
mode).
● Slide the TV/VCR/DVD switch on the remote
control to the right.
Slide to the
right.
ATTENTION
● You can not use the DVD deck when the VCR deck is in
the Automatic Satellite Recording standby and recording
mode.
● You can use the DVD deck when the VCR deck is in the
timer standby mode.
● If the unit does not accept an operation,
TV screen. (Operations are occasionally unacceptable
even if is not displayed.)
To play back a MP3/JPEG disc, see pages 42 – 44.
A
● For details, refer to "Placing a Disc" (
B
On the unit
Press VCR/DVD repeatedly so that the DVD indicator
lights up.
On the remote control
Press DVD so that the DVD indicator lights up.
C
Press 4.
Example: DVD VIDEO
● You can switch the display on the front display panel between
the title/chapter/track number and the playback time by
pressing – –:– –.
● It may take a few seconds to start playback.
● When inserting a DVD or Video CD disc, a menu display may
appear on the TV screen. To play back from the menu, refer to
"Locating a Desired Scene Using the Menu of the Video CD
with Playback Control (PBC) Function" (
"Locating a Desired Scene Using the DVD Menu" (
D
Press 9.
● To resume normal playback, press 4.
E
Press 8.
● When "RESUME" (
position on the disc where you have interrupted playback.
-To resume playback, press
-To stop playback completely, press
● Press x on the DVD deck to open the disc tray, then remove
the disc.
appears on the
Load the disc.
Select the DVD deck.
Start playback.
Title number
Playback time
Pause playback.
Stop playback.
pg. 58) is "ON," the unit memorizes the
4.
33
EN
pg. 5).
Chapter number
pg. 34) or
pg. 34).
.
again
8