Table of Contents
Advertisement
40
EN
Basic Playback
● Turn on the TV and select the VCR channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
ATTENTION
● You can not use the DVD deck when the VCR deck is in the
Automatic Satellite Recording standby and recording mode.
● You can use the DVD deck when the VCR deck is in the timer
standby mode.
To play back a MP3/JPEG disc, see pages 60 – 65.
A
Load the disc.
A Press OPEN/CLOSE (x) on the DVD deck to open the
disc tray.
● The unit's power comes on automatically.
B Place the disc in the disc tray.
● For details, refer to "Placing a Disc" (
C Press OPEN/CLOSE (x) on the DVD deck to close the
● Pressing PLAY (4) also close the disc tray.
● Playback begins automatically if the auto-playback DVD disc
● "no dc" appears on the front display panel when there is no
B
On the unit
Press VCR/DVD repeatedly so that the DVD indicator
lights up.
On the Remote
Press DVD so that the DVD indicator lights up.
C
Press PLAY (4).
Example: DVD VIDEO
● You can switch the display on the front display panel between
● It may take a few seconds to start playback.
● If you load a DVD disc whose region code does not match the
● With Video CD discs with PBC control or some DVD discs,
D
Press PAUSE (9).
● To resume normal playback, press PLAY (4).
E
Press STOP (8). Press OPEN/CLOSE (x) on the DVD
deck to open the disc tray, then remove the disc.
● Pressing PLAY (4) resume playback from the position where
NOTE:
When you press OPEN/CLOSE (x) while the unit is turned off,
pg. 7).
the unit's power comes on and the disc tray opens
automatically.
OPERATIONS ON DVD DECK
disc tray.
is loaded. Although the VCR deck is selected, the DVD deck is
selected automatically if the VCR deck is in stop mode.
disc present on the disc tray.
Select the DVD deck.
Start playback.
Title number
Elapsed time
the title number/chapter number and the elapsed time by
pressing DISPLAY.
DVD deck, "REGION CODE ERROR!" appears on the TV
screen. For details, refer to "Region Number" (
the menu display may appear on the TV screen after starting
playback. In this case, select an item which you want to play
back from the menu. Otherwise, the playback cannot go
forward. Refer to "Locating a desired scene using the menu of
the Video CD with PBC" (
scene using the DVD menu" (
Pause playback.
Stop playback.
you stop playback. For details, see "Resume Function" on
page 43.
Chapter number
pg. 5).
pg. 41) or "Locating a desired
pg. 41).
Advertisement
Table of Contents
