JVC HR-XV38SAG Instructions Manual page 63

Fine Tuning Channels Already Stored
Perform steps A to C of "Manual Channel Set" on page 61 to
access the channel list screen before continuing.
A
Select the channel to fine-tune.
Press rt until the channel you want to tune begins
blinking, then press ENTER twice.
● The "FRQ" number for the channel starts blinking.
B
Perform tuning.
Press rt until the picture is its clearest. Then press
ENTER or e.
● Repeat steps A and B as necessary.
C
Return to the normal screen.
Press SET UP.
TV System Selection — When you see
the picture but the audio can't be
heard or sounds unnatural
Perform steps A and C of "Manual Channel Set" on page 61
to access the Channel List screen before continuing.
A
Select the channel.
Press rt until the channel
you want to change its TV
system begins blinking,
then press ENTER three
times.
● The "SYS" display for that
channel starts blinking.
B
Select the TV system.
Press rt to select the appropriate TV system
(B/G]D/K]I). Then press ENTER or e.
● Repeat steps A and B as necessary.
C
Return to the normal screen.
Press SET UP.
63
EN
CH FRQ SYS CH FRQ SYS
01 150 BG 07 229 BG
02 165 BG 08 237 BG
03 195 BG 09 355 BG
04 205 BG 10 365 BG
05 213 BG 11 374 BG
06 221 BG 12 384 BG
[ ] : SELECT SYSTEM
[ENTER] : OK
[SET UP] : EXIT