Connecting Vehicle Power; Vehicle 12-80Vdc Power Connection Cable - Honeywell VX6 User Manual

Connecting Vehicle Power

Complete vehicle cradle mounting and power instruction is contained in the VX6 Vehicle Mounting Reference Guide.

Vehicle 12-80VDC Power Connection Cable

Caution For proper and safe installation, the input power cable must be connected to a fused circuit on the vehicle. This
fused circuit requires a ten Amp maximum time delay (slow blow) high interrupting rating fuse. If the supply con-
nection is made directly to the battery, the fuse should be installed in the positive lead within 5 inches of the battery
positive (+) terminal. Note: For North America, a UL Listed fuse is to be used.
Caution
For installation by trained service personnel only.
Warning
Risk of ignition or explosion. Explosive gas mixture may be vented from battery. Work only in well ventilated area.
Avoid creating arcs and sparks at battery terminals.
Note: Please see Power Adapter Cable
1. To Vehicle Battery
2. To Vehicle Mounted Device or UPS Battery Pack
3. White (DC+)
4. Black (DC-)
5. Green (GND)
6. 12 – 80VDC
3-4
for information on adapting a VX1, VX2 or VX4 DC power supply to the VX6.