System Service - Harris Maxiva ULX COFDM Series Technical Manual

Section 3 Operation
3.9.3

System Service

This screen provides a way to change 3 pieces of information which are then used
throughout the GUI. The System Service screen us shown in Figure 3-17 on page 3-22.
•
Station Name: This can be up to 24 characters and will appear at the top of every
GUI screen
•
Model Number: This value is entered at the factory. The model number chosen must
match the transmitter name plate. It is used to gray out portions of the GUI screens
which are not used by some models.
•
Serial Number: This is entered at the factory. Refer to this number if calling for sup-
port.
The System Service screen varies depending on whether it is viewed on the local GUI
screen or remotely via web browser. The local screen shown in Figure 3-18 on page 3-
23 contains additional entry windows to allow manual entry of date and time values.
The TCU will automatically set date and time values at turn on if it is connected to a
network.
3-22
WARNING: Disconnect primary power prior to servicing.
Figure 3-17 System Service Screen (Remote)
888-2629-200
Maxiva ULX COFDM Series
To Figure 3-22 To Figure 3-22
To Figure 3-24
To Figure 3-25
10/6/10