Setting Pc's Ip Address [Windows 2000] - JVC VN-C205 Instructions Manual

Settings (Step 2 Network Settings)

2-2 Setting PC's IP Address [Windows 2000]

Upon installing the camera, set the IP address of the PC that is used to operate this camera.
For Windows 2000, set according to the following procedure.
1.
Click .
• Select [Settings] and click [Properties].
2.
Double-click [Network and Dial-up Connection].
3.
Double-click [Local Area Connection].
30
Click .
Select [Internet Protocol (TCP/IP)].
Click .
4.Click .
Select [Use the following IP address].
Set [IP address] to 192.168.0.3.
Set Subnet mask to an appropriate value.
Ask the network administrator if
necessary.
31