SATO CG408TT Quick Manual page 15

Model name CG408DT
Outer diameter of Maximum ø128 mm
paper roll Inner diameter of paper roll core: ø40 mm (ø1.5 inches)
Ribbon size/
Ribbon type/
Ribbon winding
direction
Label issuing Standard: Continuous mode, Tear off mode, Sensor-off mode
mode Option: Dispenser mode, Cutter mode, Linerless mode
Dimensions 179 (W) × 238 (D) × 173 (H) (mm)
* Excluding the protrusion portion.
Weight 1.7 kg
Power AC adapter
specifi cations Input power voltage: AC 100 V to 240 V ±10% (full range)
Frequency: 50/60 Hz
Output power voltage: DC 19 V
Power consumption
Input power voltage conditions: AC 100 V
At peak: 50 W (at 30% printing ratio)
During standby: 2.5 W
Environmental Operating environment: 4 to 38°C, 30 to 80 % RH (However, no condensation)
conditions (Temperature/ Storage environment: –10 to 60°C, 15 to 85 % RH (However, no condensation)
Humidity) (Not including ribbon, labels, and other supplies.)
Interface Select one of the following (The factory will provide the unit with the
selected interface.)
USB (B type) and RS-232C (D-SUB 9-pin)
1
USB (B type) and LAN (10 BASE-T/100 BASE-TX auto switching)
2
USB (B type) and IEEE1284
3
Options Cutter unit, Dispenser unit (w/ dispenser paper sensor), RTC kit,
Non-cutter unit for linerless label, Simplifi ed input Keypad,
TSC Smart Keyboard, 1D barcode scanner
LED ERROR: (Red)
1
ON LINE (POWER): (Green)
2
Operation button [POWER], [FEED/LINE]
Paper length I-mark sensor (Reflective type)
detection sensor Label gap sensor (Transmissive type)
Barcode UPC-A/UPC-E, JAN/EAN, CODE39, CODE93, CODE128, GS1-128
(UCC/EAN-128), CODABAR (NW-7), ITF, Industrial 2 of 5, Matrix 2 of 5,
BOOKLAND, MSI, POSTNET, GS1 DataBar (RSS)
* GS1 DataBar is the new version of RSS-14.
2D barcode PDF417(Ver. 2.4), MAXI code(Ver. 3.0), QR code, GS1 DataMatrix (ECC200)
CG412DT CG408TT
Length: Maximum 100m
Width: 110 mm ± 0.5 mm
Outer diameter: Max.ø38 mm
(Inner diameter of ribbon core:
ø12.7 mm)
—
Winding direction: Face-out winding
Winding method: Ribbon core
winding method
*Recommended use of carbon ribbon
manufactured or specifi ed by SATO.
1.9 kg
CG412TT
9