Network Setup - Samsung SNB-5000 User Manual

setup screen
- Auto : Displays in color mode during normal daytime and switches to black and
white mode in a low contrast scene at night.
If you set the AGC mode to OFF from <Exposure>, the AUTO DAY/NIGHT mode will be disabled
accordingly.
Dwell time : This is the time while each applicable lighting condition is kept in order

to enable the switch between day and night modes.
Duration : Adjust the brightness of the lighting where the mode switch occurs.

Sharpness mode : Adjust the overall sharpness of the image.

If selecting <on>, you can adjust the sharpness of the image.
Sharpness level : The higher the level is, the sharper and clearer the outline of the

image becomes.
Gamma : Adjust the contrast of the image.

Color level : Adjust the color level of the image.

Camera title : Use alphanumeric characters in the list and enter a desired title in the

bottom input line.
You can enter up to 15 characters for the title.
Camera title position x, y : Select the position where the camera name will be displayed.


neTworK SeTup

interface
1.
From the Setup menu, select the
<network (
2.
Click <interface>.
3. Set the <interface> and <ipv6 setup>
as necessary.
IP type : Select an IP connection type.

- Manual : Specify the IP address,
Subnet mask, Gateway, DNS1,
and DNS2.
- DHCP : Specify the DNS1 and DNS2.
- PPPoE : Specify the DNS1, DNS2, Name and Password.
If you set it to <Manual>, you should specify the IP, Subnet mask, Gateway, DNS 1 & 2 manually.
MAC address : Shows the MAC address.

IP address : Displays the current IP address.

Subnet mask : Displays the <Subnet mask> for the set IP.

Gateway : Displays the <Gateway> for the set IP.

2_ setup screen
)> tab.