Samsung SNB-5000 User Manual page 87

user
1.
From the Setup menu, select the
<System ( )> tab.
2.
Click <user>.
3.
Provide the necessary user information.
Administrator Password Change :

Change the current password for the
administrator.
Guest setup : If <Guest access> is

permitted, any guest can access the
Web Viewer screen but can view only the Live viewer screen.
Current users : You can change the user information and adjust the permission

level for a user who is set to <enable>.
- Video : You can select a video profile in the Liver viewer screen.
- Audio-In : The audio input option will be activated in the Live Viewer screen.
- Controls : You can control MIC and alarm button.
4. When done, click [Apply (
upgrade / reboot
1.
From the Setup menu, select the
<System ( )> tab.
2. Click <upgrade / reboot>.
3.
Select a desired item and set it
appropriately.
Upgrade : Performs upgrading the

system.
Factory default : Resets the system

to the factory default.
- Except network parameter : Reset
the other settings except for the interface/port/DDNS/IP filtering settings.
- All : Resets all settings including the camera settings. (however, the log
information will not be reset)
If you reset the camera, the network settings will be adjusted so that DHCP can be enabled.
If there is no DHCP server in the network, you must run the IP Installer program to change the
basic network settings such as IP address, Subnet mask, Gateway, etc., before you can connect
to the network.
)].
English _