Samsung SNB-5000 User Manual page 84

setup screen
4. Select a desired <Defined Area Based rules>.
You can specify up to 3 defined area event rules.
Entering : An event where a moving object passes through the defined area and

enters inside will be detected.
Exiting : An event where a moving object passes through the defined area and

exits outside will be detected.
Appearing/Disappearing : An event will be detected where an object that has not

existed in the area until the previous frame, suddenly appears or disappears in the
area without passing through the defined area.
5.
Click [oK].
To cancel the specified area, right-click on the area and select [Delete] in the context
menu.
6. When done, click [Apply (
To use the iv analysis function according to the whole area based rule
1. Set <iv analysis function> to
<enable>.
2.
If you set the event rule to <entire
area based rules>, this will display the
popup window.
3. Select a desired <entire Area Based
rules>.
Appearing : An event where an object

that has not existed suddenly
appears will be detected.
Disappearing : An event where an object that has existed suddenly disappears will

be detected.
Scene Change : An event where the screen is changed at more than a certain time

interval will be detected.
You can set the <Scene Change> rule along with rules : <Appearing> and <Disappearing>.
4.
Click [oK].
5. When done, click [Apply (
_ setup screen
)].
)].