Table of Contents
Advertisement
26
MENU SETTINGS
EN
Changing the Menu Settings
You can change the menu settings to customize your
camera. Access the desired menu screen by following the
steps below, then change the various settings.
INFO
r
w
49
t e
1
Select the operation mode.
For Recording Menus:
Set the power switch to
button located on the switch.
For Playback Menus:
Set the power switch to
button located on the switch.
2
Press MODE to select
(voice).
3
Press MENU. The menu screen appears.
4
Select the desired sub menu and menu item with rt
and 49.
To return to the normal screen, press MENU.
To display the operation guide, press INFO when the menu
screen is displayed.
MODE
MENU
Lock Button
Power Switch
while pressing down the lock
while pressing down the lock
(video),
(still image) or
NOTE:
Information on the following pages (
excerpts of menu settings.
Refer to the advanced operation manual in the CD-ROM for
the full descriptions. (
Common Menus for All Modes
[ ] = Factory-preset
BASIC SETTING
PRESET
EXECUTE: Resets all settings to the factory-preset.
[CANCEL]: Returns to menu screen without executing
reset.
DEMO MODE
OFF: Disables the function.
[ON]: Activates demonstration mode and shows various
features on the display.
OPERATION
SOUND
OFF: Turns off operation sound.
BEEP: The beep sounds when the power is turned on or
off, and at the beginning and end of recording.
[MELODY]: Instead of a beep, a melody sounds when any
operation is performed.
pg. 26 – 31) are only
pg. 32)
Advertisement
Table of Contents
