Table of Contents
Advertisement
14
GETTING STARTED
EN
Power
This camera's 2-way power supply system lets you
choose the most appropriate source of power. Do not use
provided power supply units with other equipment.
Charging the Battery Pack
Battery Pack
Protrusion
Power/Charge
Lamp
Lock Button
Power Switch
Battery Cover
Open the cover.
To DC
connector
AC Adapter
To AC outlet
1
Set the power switch to OFF while pressing down the
lock button located on the switch.
2
Slide and remove the battery cover
the
part with your finger.
3
Insert the battery pack firmly into the battery pack mount
until it locks into space in the direction of the arrow
4
Close the battery cover firmly until it locks.
5
Connect the AC adapter to the camera.
6
Plug the AC adapter into an AC outlet. The power/
charge lamp on the camera blinks to indicate charging
has started.
7
When the power/charge lamp goes out, charging is
finished. Unplug the AC adapter from the AC outlet.
Disconnect the AC adapter from the camera.
To detach the battery pack
Open the battery cover, and remove the battery pack in
the direction of the arrow
Battery pack
BN-VM200U (provided)
A
by hooking on
C
by holding the
part.
Charging time
Approx. 1 hr. 35 min.
B
.
Advertisement
Table of Contents
