Playback; Navigation Function - JVC GR-DX106/76AG Instructions Manual

NAVIGATION Function

The NAVIGATION Function helps you check tape
contents by making thumbnail images on a memory card.
TO MAKE THUMBNAIL IMAGES
DURING TAPE RECORDING
1
Load a memory card (
( pg. 9). Set the VIDEO/MEMORY Switch
"VIDEO", then set the Power Switch
pressing down the Lock Button
2
4
Press MENU . The Menu Screen appears. Press +
5
or – to select " (CAMERA)" and press SELECT/
3
SET .
3
5
Press + or – to select "NAVIGATION" and press
3
. The Sub Menu appears. Select the
SELECT/SET
desired mode by pressing + or –
MANUAL: The camcorder makes a thumbnail image
only when NAVI STORE
is finished (factory preset).
Modes other than "MANUAL": "
and the camcorder always makes a thumbnail image
when the recording time is over the selected period of
time.
3
Press SELECT/SET .
4
5
Press + or – to select "
3
twice. The Menu Screen closes.
SELECT/SET
5
Press the Recording Start/Stop Button
tape recording.
6
Press the Recording Start/Stop Button
tape recording.
If "MANUAL" is selected in step 3, press NAVI STORE
2
.
5
• " " appears and the image of the point where
recording is started is stored on the memory card as a
thumbnail image.
NOTE:
The remaining number of storable thumbnail images also
appears on the screen when it reaches 10 or less. If "REC
SELECT" is set to "
the number shows how many 640 x 480 pixel images can
be stored.
TO FIND SCENES ON TAPE USING THUMBNAIL
IMAGES (NAVIGATION SEARCH)
1
Load a memory card (
( pg. 9). Set the VIDEO/MEMORY Switch
"VIDEO", then set the Power Switch
pressing down the Lock Button
2
1
Press NAVI . The loaded tape's NAVIGATION
thumbnail image screen appears.
• Turn the SHUTTLE SEARCH Ring
to display the next page, or counterclockwise (2) to
display the previous page.
pg. 11) and cassette
t
to
@
to " " while
$
.
5
.
2
is pressed after a recording
1
" is displayed
RETURN" and press
!
to start
!
to stop
/ " in the Menu Screen,
pg. 11) and cassette
t
to
@
to " " while
$
.
#
clockwise (3)
3
5
Press + or – to select desired image and press
3
.
SELECT/SET
• "NAVIGATION SEARCH" appears blinking and the
camcorder starts searching the tape for the relevant
point of the selected thumbnail image.
To cancel NAVIGATION Search midway . . .
! 7
..... press 4/6 or 5
#
SEARCH Ring .
TO ADD THUMBNAIL IMAGES DURING TAPE

PLAYBACK

1
Perform step 1 of "TO FIND SCENES ON TAPE
USING THUMBNAIL IMAGES (NAVIGATION
SEARCH)".
2
!
Press 4/6 to start tape playback.
3
2
Press NAVI STORE
5
• " " appears and the image of the point where
2
is pressed is stored on the memory
NAVI STORE
card as a thumbnail image.
TO DELETE THUMBNAIL IMAGES
1
Load a memory card (
t
MEMORY Switch to "VIDEO", then set the Power
@
Switch to " " while pressing down the Lock
$
Button .
2
4
Press MENU . The Menu Screen appears. Press +
5
or – to select " (VIDEO)" and press SELECT/
3 5
SET . Press + or –
3
press SELECT/SET . The Sub Menu appears.
3
5
By pressing + or –
..... select "IMAGE SEL." to delete the currently
displayed thumbnail image.
..... select "TAPE SEL." to delete all thumbnail images
for the tape which contains the currently displayed
image.
..... select "ALL." to delete all thumbnail images stored
on the memory card at once.
Then, press SELECT/SET
screen appears.
4
5
Press + or – to select "EXECUTE", then press
3
.
SELECT/SET
• To cancel deletion, select "RETURN". Turn the
SHUTTLE SEARCH Ring
display the next image, or counterclockwise (2) to
display the previous image.
• Thumbnail images cannot be deleted during tape
playback.
NOTE:
Once images are deleted, they cannot be restored. Check
images before deleting.
, or turn the SHUTTLE
at the desired point.
pg. 11). Set the VIDEO/
to select "NAVI.DEL." and
. . .
3
. The NAVIGATION
#
clockwise (3) to
Continued on next page.
ADVANCED FEATURES
EN
21