Adding Images Individually - Canon PowerShot G1 X Mark II User Manual

• [ ] may be displayed on the camera to warn you that the memory
card has print settings that were configured on another camera.
Changing the print settings using this camera may overwrite all
previous settings.
• After importing images to your computer, also refer to "Software Instruction
Manual" (= 194) and the printer manual for further information.

Adding Images Individually

Choose [Select].
1
Following the procedure in "Choosing
a Selection Method"
[Select] and press the <m> button.
2 Choose an image.
Press the <q><r> buttons or turn the
<7> dial to choose an image, and then
press the <m> button.
[ ] is displayed.
To remove the image from the photobook,
press the <m> button again. [
longer displayed.
Repeat this process to specify other
images.
When finished, press the <n> button
to return to the menu screen.
Adding All Images to a Photobook
Still Images
Removing All Images from a Photobook
(= 203), choose
] is no
Still Images
Following the procedure in "Choosing
a Selection Method" (= 203), choose
[Select All Images] and press the <m>
button.
Press the <q><r> buttons or turn the
<7> dial to choose [OK], and then press
the <m> button.
Still Images
Following the procedure in "Choosing
a Selection Method" (= 203), choose
[Clear All Selections] and press the <m>
button.
Press the <q><r> buttons or turn the
<7> dial to choose [OK], and then press
the <m> button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, M, C1, and
C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
204