Controlling A Ptz Device - Samsung SRD-443 User Manual

CONTROLLING A PTZ DEVICE

The DVR enables you to adjust the settings of a PTZ camera as well as an ordinary one to your preference.
PTZ Device
The PTZ device can be activated only if a channel in connection with the PTZ camera is selected.
Getting started with PTZ
The PTZ camera is available, only if a channel is selected, in the following way :
Using the remote control buttons
Press the [PTZ] button on the remote control.
Using the launcher menu
Click PTZ < > to display the live launcher.
PTZ
Using the right-click menu in Live mode
Right-click any area on the screen to display the context menu, and
select <PTZ Control>.
Using icons on the live screen
Click the PTZ <
The PTZ function is available only if the PTZ camera is
M
connected so that the PTZ icon is displayed on the screen.
Using the PTZ camera
You can use one camera to perform all functions of PAN, TILT and ZOOM for monitoring multiple places and
set the preset to your preference in a desired mode.
1. Launch the <PTZ Control> menu.
As the PTZ <
yellow, you access the "PTZ Control" mode to display the
"PTZ Control" menu.
Be sure to configure PTZ working environments before
M
operation, since the PTZ Working(Active) mark can be
appeared to be activated even when PTZ is not operative.
2. Use the PTZ wheel in the launcher menu to adjust the
monitoring area, or use the direction buttons (▲▼◄ ►) on
the remote control to move the camera to a desired place.
• PTZ Wheel : Clicking a nearer point to the center will move in that direction slowly; clicking a farther point
from the center will move fast.
Keep clicking left to rotate the lens counter clockwise; keep clicking right to rotate the lens clockwise.
• Zoom ( ) : You can use the Zoom function of the PTZ camera.
• IRIS ( ) : Adjusts the intensity of radiation incoming to the iris.
• Focus ( ) : Enables you to adjust the focus manually.
• Auto Pan : The camera automatically runs between the two points that you selected.
• Scan : The camera moves to the preset points in the specified sequence.
If multiple presets are specified, the PTZ camera will automatically move to all of the preset points one at a
time.
> icon on the live screen.
> icon on the bottom right corner turns
2013-01-01 01:10:25
S c e n e M o d e
S p o t O u t
P T Z C o n t r o l
Z o o m I n
A u d i o
F r e e z e
S t o p A l a r m
R e c o r d
P l a y
S e a r c h
B a c k u p
M a i n M e n u
S h u t d o w n
H i d e L a u n c h e r
L o g o u t
2013-01-01 01:10:25
2013-01-01 01:10:25
P T Z C o n t r o l C A M 0 1
C a m e r a S e t u p
A u t o P a n S e l e c t
S e l e c t P r e s e t
S c a n S e l e c t
P a t t e r n S e l e c t S a v e
P r e s e t S e l e c t D e l e t e D e l e t e
E x i t
English _63
R e n a m e
D e l e t e A l l D e l e t e A l l