Yamaha YZFR6V Service Manual page 17

To adjust the brightness of the multi-function
meter displays and tachometer:
1. Turn the key to "OFF".
2. Push and hold the "SELECT" button.
3. Turn the key to "ON", and then release the
"SELECT" button after five seconds.
4. Push the "RESET" button to select the de-
sired brightness level.
5. Push the "SELECT" button to confirm the se-
lected brightness level. The control mode
changes to the shift timing indicator light ac-
tivity function.
To set the shift timing indicator light activity func-
tion:
1. Push the "RESET" button to select one of the
following indicator light activity settings:
• The indicator light will stay on when activated.
(This setting is selected when the indicator
light stays on.)
• The indicator light will flash when activated.
(This setting is selected when the indicator
light flashes four times per second.)
• The indicator light is deactivated; in other
words, it will not come on or flash. (This set-
ting is selected when the indicator light flash-
es once every two seconds.)
2. Push the "SELECT" button to confirm the se-
lected indicator light activity. The control
mode changes to the shift timing indicator
light activation function.
To set the shift timing indicator light activation
function:
NOTE:
The shift timing indicator light activation function
can be set between 10000 r/min and 18000
r/min. From 10000 r/min to 13000 r/min, the indi-
cator light can be set in increments of 500 r/min.
From 13000 r/min to 18000 r/min, the indicator
light can be set in increments of 200 r/min.
1. Push the "RESET" button to select the de-
sired engine speed for activating the indicator
light.
2. Push the "SELECT" button to confirm the se-
lected engine speed. The control mode
changes to the shift timing indicator light de-
activation function.
To set the shift timing indicator light deactivation
function:
NOTE:
• The shift timing indicator light deactivation
function can be set between 10000 r/min and
18000 r/min. From 10000 r/min to 13000 r/min,
the indicator light can be set in increments of
500 r/min. From 13000 r/min to 18000 r/min,
the indicator light can be set in increments of
200 r/min.
• Be sure to set the deactivation function to a
higher engine speed than for the activation
function, otherwise the shift timing indicator
light will remain deactivated.
1. Push the "RESET" button to select the de-
sired engine speed for deactivating the indi-
cator light.
2. Push the "SELECT" button to confirm the se-
lected engine speed. The control mode
changes to the shift timing indicator light
brightness function.
To adjust the shift timing indicator light bright-
ness:
1. Push the "RESET" button to select the de-
sired indicator light brightness level.
2. Push the "SELECT" button to confirm the se-
lected indicator light brightness level. The dis-
play will return to the odometer or tripmeter
mode.
1-10
FEATURES