Fibe Tv : Frequently Asked Questions - Motorola Fibe TV Reference Manual

Fibe TV:
Frequently asked Questions
Q. How long does the installation generally take?
A. Typical installation time is approximately 4 hours, depending on your
individual installation requirements.
Q. Can I program the remote control to operate my other home
entertainment components?
A. Yes, you can. Refer to the Bell Fibe TV remote guide that came
packaged with the Fibe HD PVR or HD receiver for details.
Q. Where can I find the latest Channel line-up?
A. The latest version of the Channel Line-up can be found online at Bell
Fibe Support. Visit bell.ca/fibetvchannels (Toronto area) or bell.ca/
fibetvchannelsqc (Montreal area).
Q. Can I record more than one show at a time?
A. With Bell Fibe TV, you can record up to 4 different programs
simultaneously. Please refer to the "Capabilities of your Fibe HD PVR"
section for more information
Q. What are the features of the Whole home PVR feautre?
A. Features include:
• Pause and rewind live TV on the main TV connected to your Fibe HD PVR.
• View, set, delete, and manage your recordings from any Fibe HD receiver
in your home.
• Record both SD and HD programs on a hard drive.
Please note:
- Depending on the configuration of your home, PVR service
functionality may be limited on some channels or limited due
to the number of TVs in use at the same time.
- There is a maximum of 2 HD and 2 SD channels you can watch
or record at one time. If there are any conflicts when trying to
record, a message on your screen will tell you how to resolve
the conflict.
Q. What equipment do I receive to enable me to use Bell Fibe TV
and Internet service?
A. The very basic equipment needed for one TV consists of a Fibe HD PVR,
a wireless enable modem and a remote control. Each additional TV will
require a Fibe HD receiver.
28