Table of Contents
Advertisement
3.13.2 Heat pump for DHW heating with solar thermal system support
1
2
Fig. 8
[1]
Thermal solar collectors
[2]
Solar programming unit
[3]
Cold water inlet
[4]
Shut-off valve
[5]
Check valve
[6]
Safety valve
[7]
Expansion vessel
[8]
Drain set
[9]
Heat pump
[10] DHW connection
[11] Outlet siphon
[12] Solar pump station
[13] Container for safety valve drain
[14] Mixing valve
[15] Integrated electric heating element
4
Transport and storage
NOTICE: Transport damage!
B Avoid tilting the appliance at an angle of more than
45°.
B Take care when handling the appliance.
B To avoid dropping the appliance and damaging
internal components, do not pivot the appliance.
SUPRAECO W – 6 720 646 161 (2012/04)
12
13
7
10
14
3
6
8
7
3
4
5
11
NOTICE: Transport damage!
B To avoid transport damage, wait until the appliance is
at the installation location to remove the protective
packaging.
B Transport and set down the appliance carefully. Jerky
movements can damage the internal glass-lined
coating, the components and their connections or the
external casing.
B Use straps to prevent the appliance from becoming
scratched.
B Use suitable means of transport to bring the appliance
to the installation location (special car, pallet truck,
etc).
General
The appliance is delivered on a single pallet and is protected against
transport damage by special packaging.
Always store and transport the appliance in its original packaging, in
vertical position (check "tilt label" prior to installation) and with the
storage tank empty. Ambient temperatures of -20 °C to +60 °C are
permissible for storage and transport.
Transport and storage
9
15
6720646160-28.2V
13
Hide quick links:
Advertisement
Table of Contents
