i3TOUCH V-SENSE V8403 T10 User Manual page 28

I3touch v-sense
Table of Contents

Advertisement

Expansion
RTC Battery
Power Requirement
External Front I/O
Audio
Power on button
Reset
LED
Ethernet
USB
HDMI
Antenna Hole
External Rear I/O through JAE TX-25 80-pin connector
Display
Audio Output
USB
Power
Control Signal
Internal I/O
SO-DIMM
SATA
Mini-PCIexpress
Environment Specification
Operating
Temperature
Certification
FCC/CE
RoHS
Ordering Information
AOPS-7080
Note: Product design and features without prior notice may be changed.
28
www.i3-learning.com
1x mini-PCIexpress socket for mini-card module
By using CR2032 Li-battery
DC+12~19V +/- 5% input minimum 5A, maximum up to 8A
1x mic-in phone Jack and 1x Line-out phone jack connector
1x Toggle switch for Power on/off system
1x Toggle Switch for Reset
1x green for power-on status, 1x green for Storage status
5x RJ45 with LED connectors (1x WAN and 4x LAN)
1x double-stack type A USB connector for 2x USB 3.0 ports
1x HDMI connector
2x SMA-type for WiFi Antenna
1x TMDS and 1x Display Port
Audio output for R/L channels
2x USB2.0 and 1x USB 3.0
DC input from +12~+19V
1x UART (TX/RX), Pluggable Module Power Status, Power ON via display panel, Plug-
gable Board Detect, Consumer Electronics Control (CEC), and System Fan Control
2x DDR3 SO-DIMM sockets
1x SATA port for 1x 2.5" SSD/HDD drive bay
1x mini-PCIexpress socket with SIM-Card reader
Operating: -5°C to +45°C
Storage: -20°C~80°C
Class A
AHA DOC
OPS, onboard Intel Core i5-4400E Processor

Advertisement

Table of Contents
loading

Table of Contents