1. Manuals
  2. Brands
  3. i3TOUCH Manuals
  4. Monitor
  5. V-SENSE 8404 4K T10
  6. User manual

i3TOUCH V-SENSE 8404 4K T10 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
i3TOUCH V-SENSE
V8404 4K T10 USER MANUAL
SENSE
SENSE
SENSE

Advertisement

Table of Contents
loading

Related Manuals for i3TOUCH V-SENSE 8404 4K T10

Summary of Contents for i3TOUCH V-SENSE 8404 4K T10

  • Page 1 V-SENSE V8404 4K T10 USER MANUAL SENSE SENSE SENSE...

  • Page 2: Table Of Contents

    7.9 What to do if calibration is still inaccurate even after calibrating in V-sense & windows 7.10 What to do if windows calibration does not start 7.11 Disabling “USB Selective suspend setting” 7.12 No touch after installing the driver 7.13 What to do if you can’t duplicate your screen i3TOUCH 04 FHD T10 USER MANUAL...

  • Page 3: Important Safety Instructions

    1. Important Safety Instructions Icons used for safety precautions ICON NAME MEANING Warning If precautions marked with this sign are not followed, this may result in a serious injury or even a fatality Caution If precautions marked with this sign are not followed, this may result in a injury or property damage After unpacking, grab the display with the upper handle and the bottom bezel.
  • Page 4 » If the display should fall, this may result in serious injuries. » Since the front part is heavier, install the product on a flat and stable surface. 1. 1.2.10 » Avoid rainwater entering the display i3TOUCH 04 FHD T10 USER MANUAL...
  • Page 5 Caution 1. 1.2.12 Do not let the product drop while moving it. » This may result in a problem with the product or injury. 1. 1.2.13 Do not place the product face down on the floor. » This may damage the panel of the product. 1.
  • Page 6 1. 1.4.14 Displaying a still image for a long time may create a persistent image or stain on the screen. » If you do not use the product for a long time, use the power-saving mode or set the screen saver to the moving picture mode. i3TOUCH 04 FHD T10 USER MANUAL...
  • Page 7 1. 1.4.15 When not using the product for a long time such as leaving the room, unplug the power cord from the wall outlet. » Otherwise, it may cause dust accumulation and result in fire caused by overheating or short circuit or result in an electric shock.

  • Page 8: Care And Maintenance

    • Displaying a still image for a long time may create a persistent image or stain on the screen. If you do not use the product for a long time, set the power-saving mode or screen saver. • Due to technological constraints of the Panel manufacturer, pixel errors are sometimes unavoidable. Please consult our pixel policy i3TOUCH 04 FHD T10 USER MANUAL...

  • Page 9: Introduction

    2. Introduction 2.1 Package Contents - Unpack the product and check if all of the following contents has been included. - Store the packaging box in case you need to move the product later. - If any items are missing, contact your dealer. - Contact a local dealer to purchase optional items.

  • Page 10: Parts Description

    ) : Selection Input Signal button 4. IR Receive Remote Control: Aim the remote control towards this spot on the LED Display. USB 1 Terminal (Direct connect to PC) USB 2 Terminal (Direct connect to PC) i3TOUCH 04 FHD T10 USER MANUAL...

  • Page 11: Rear View

    3.2 Rear View for touch AUDIO PC-RGB RS-232C USB L(8Ω)R(8Ω) HDMI HDMI 2 HDMI 1 OPTION SPEAKER OUT INTERFACE DESCRIPTION DISPLAY PORT Input- up to UHD Input UHD HDMI High Definition Multimedia Input- up to UHD input AUDIO IN Audio IN for DVI and PC source PC-RGB PC Screen Input FHD HDMI 2...

  • Page 12: Remote Control

    Navigates next menu in main OSD menu. Decreases sound volume of speaker. Same as “-Key” on keypad. Navigates before menu in main OSD menu. 4.1 How to insert battery. Insert the battery into proper polarities Battery model:(CR-2025 3V) i3TOUCH 04 FHD T10 USER MANUAL...

  • Page 13: Osd Menu

    5. OSD MENU 5.1. MENU STRUCTURE In this menu system, there are several ways to customize the menu settings provided. Most menus consist of three levels to set up the options, but some require greater depth for the variety of settings.
  • Page 14 The source “OPS” as indicated at the bottom of above image will only be displayed in the source selection list if OPS mode is enabled. However if you do not have an OPS computer, do not turn on the OPS mode! i3TOUCH 04 FHD T10 USER MANUAL...
  • Page 15 5.3 Select menu language On Screen Menus Language Selection - The menus can be shown on the screen in the selected language. First select your language. 1. Press the MENU button and then use button to select the OPTION icon. 2.
  • Page 16 3. Press the OK button and then use button to display the available me nus. • Your monitor’s OSD (On Screen Display) may differ slightly from what is shown in this manual. i3TOUCH 04 FHD T10 USER MANUAL...
  • Page 17 5.4.2 PICTURE MENU OPTIONS 1) Picture Mode - Adjust the picture appearance to suit your preference and viewing situations. 1. Press the MENU button and then button to select the PICTURE mode. button and then use OK button to select Picture Mode menu. 2.
  • Page 18 4. Press the button to select Picture Mode - User menu. Red, Green, Blue 5. Press MENU to return to the previous menu. (Only user-mode Support) - Color Temperature : select between Normal, Cool and Warm. i3TOUCH 04 FHD T10 USER MANUAL...
  • Page 19 3) Aspect Ratio - Selects the screen format. 1. Press the MENU button and then use button to select the PICTURE icon. 2. Press the button and then use OK button to select Aspect Ratio menu. 3. Press the OK button and then use button to select desired option: Auto, 4:3, 16:9, Zoom1, Zoom2.
  • Page 20 1 . Press the OK button. [Range scaling changes from 16-234 to 0-255] -> color range can not be changed when display is used in USB mode (USB media port) or PC mode (VGA-cable). i3TOUCH 04 FHD T10 USER MANUAL...
  • Page 21 5.4.3 SOUND MENU OPTIONS 1) Sound Standard Mode - Adjust the sound to suit your taste and room situations. 1. Press the MENU button and then use button to select the SOUND icon. 2. Press the button and then use OK button to select Sound Mode menu : Standard, Music, Movie, Sports, User.
  • Page 22 2. Press the button and then use OK button to select the Surround Sound menu. button OK button to make appropriate adjustments : 3. Press the 4. Press MENU to return to the previous menu. i3TOUCH 04 FHD T10 USER MANUAL...
  • Page 23 5) Volume - Adjust the sound to suit your taste and room situations. 1. Press the MENU button and then use button to select the SOUND icon. 2. Press the button to select the Volume menu. 3. Press OK button and then use button to make appropriate adjustments.
  • Page 24 2. Press the 3. Press the OK button and then use button to select the Dimming Menu. 4. Press the button to set Dimming options. 5. Press MENU to return to the previous menu. i3TOUCH 04 FHD T10 USER MANUAL...
  • Page 25 2-1-1) Dimming Menu – Auto Dimming (Light Ambient Sensor Option only) - Enable/disables auto dimming control by light ambient sensor button to select the OPTION icon. 1. Press the MENU button and then use button to select the Dimm Control Menu. 2.
  • Page 26 Dimming Menu. button to select the Min Ambient functions. 4. Press the 5. Use button to set detected light ambient value by LUX unit. 6. Press MENU to return to the previous menu. i3TOUCH 04 FHD T10 USER MANUAL...
  • Page 27 2-1-5) Dimming Menu – Ambient (Light Ambient Sensor Option only) - Displays current detected light ambient level by LUX unit. Read Only. 3) Heat Control - Automatic Fan controls by internal/external temperature sensor 1. Press the MENU button and then use button to select the OPTION icon.
  • Page 28 3. Press the OK button and then use button to select the Fan Active Temperature Menu. 4. Use button to set fan driving temperature by Celsius degree unit. 5. Press MENU to return to the previous menu. i3TOUCH 04 FHD T10 USER MANUAL...
  • Page 29 3-3) Heat Control Menu – Hysteresis - Adjusts fan driving hysteresis temperature by Celsius degree. 1. Press the MENU button and then use button to select the OPTION icon. 2. Press the button to select the Heat Control Menu.. 3. Press the OK button and then use button to select the Hysteresis Menu.
  • Page 30 OPTION icon. button to select Set ID menu 2. Press the 3. Press button to make appropriate adjustments. [ 0 ~ +99] 4. Press MENU to return to the previous menu. i3TOUCH 04 FHD T10 USER MANUAL...
  • Page 31 6) 3D Type 3D used and whether adjustments. 1. Press the MENU button and then use button to select the OPTION icon. 2. Press the button to select 3D Type menu 3. Press the OK button to select the Details Menu : 3D OFF, Side by Side, Top and Bottom, Frame Packing.
  • Page 32 Warning: Only use Software Update if your technical support contact provided you a firmware update for the display. If you use this update without a USB stick with a new firmware-version, you risk to damage the display! i3TOUCH 04 FHD T10 USER MANUAL...

  • Page 33: Clock Menu

    CLOCK MENU 1) Time Settings Enable the user to set up the clock information. 1-1) Clock If current time setting is wrong, reset the clock manually. 1. Press the MENU button and then use button to select the TIME icon. 2.
  • Page 34 Off Timer. 3. Press the button and then use button to select the On, OFF. 4. Use button, button to adjust off time schedule and activation. 5. Press MENU to return to the previous menu. i3TOUCH 04 FHD T10 USER MANUAL...
  • Page 35 4) Sleep Timer Timer function operates only if current time has been set. 1. Press the MENU button and then use button to select the TIME icon. 2. Press the button to select Sleep Timer. 3. Press the OK button and then use button to select the desired time.

  • Page 36: Troubleshooting

    4. If sound is send via HDMI, check the sound settings of the computer to see if audio on HDMI is not muted. 5. Check if no other external speakers are connected If this doesn’t solve the issue, please contact your i3 support contact i3TOUCH 04 FHD T10 USER MANUAL...

  • Page 37: Touch Configuration

    Go to the i3-Technologies website www.i3-technologies.com and download the latest drivers (products -> drivers -> i3TOUCH drivers) 2 Connecting the touch sensor Connect the port indicated “USB touch” with the supplied USB cable to the computer. If there are 2 USB-ports and one is indicated “USB for touch OPTION”, do not use this port as it is...

  • Page 38: Installing The Drivers

    Now click on the file “V-Sense Driver – x.x.xx.xx.exe” (version number depends on the download date). If you cannot open the file, right click on the file and choose “run as administrator”. Make sure you have installation rights. i3TOUCH 04 FHD T10 USER MANUAL...

  • Page 39: What To Check When Drivers Can't Be Installed

    Run the installer and click 4 times “next” and finally “install”. If you can finish the installation, the drivers will ask for a reboot. Reboot your computer to finish the installation. If the installation was successful, skip step 4 4 What to check when drivers can’t be installed The newest V-sense drivers can be installed even when no device is connected.

  • Page 40: Power Supply

    USB-cables can result in a loss of power and signal strength (data signal). 5 Power supply The i3TOUCH needs around 5 volts to be recognized & work properly. The touch sensor is powered via the USB-cable and the USB-port of your computer. In very seldom situations (!) a i3TOUCH Premium XX03 (XX stands for display size) can have touch that shows strange behavior such as random “ghost touch points”...

  • Page 41: Usb-Cabling Of The I3Touch

    6 USB-cabling of the i3TOUCH Normally a computer and a i3TOUCH will communicate without any troubles if only the delivered USB-cable is used. In some seldom cases however other cabling is necessary because of insufficient power (see step 5) or because the PC is located away from the display.
  • Page 42 Make sure the image shown on both your computer screen as on the i3TOUCH is full screen. Prevent black borders left/right or top/bottom. This means there is a difference in resolution.
  • Page 43 If the image on the computer display or the i3TOUCH is showing black borders, go to “control panel -> display -> screen resolution”. Choose the FHD (1920*1080) or 4K resolution (depending on I3TOUCH). Then choose duplicate. Now choose “advanced settings”. Choose the tab of your graphical card control panel. In this...

  • Page 44: Calibrating The I3Touch

    As an alternative, choose “projector only” in your display settings and only use the 2nd display (i3TOUCH). If you prefer to use both computer display and i3TOUCH, move on to step 9 before heading to step 8. 8 Calibrating the I3TOUCH Calibrate your i3TOUCH.
  • Page 45 Choose calibration and press on the 9 red circles with your finger (or the i3TOUCH pen to increase accuracy) from the top left side to the bottom right side. This concludes the calibration. Check if your i3TOUCH is calibrated well. If so, the display is ready to be used.

  • Page 46: What To Do If Calibration Is Still Inaccurate Even After Calibrating In V-Sense & Windows

    If you calibrated using the V-sense drivers & windows calibration, if there are no black borders on the PC screen or the i3TOUCH image but still the calibration is not accurate, go to “screen resolution” (see step 7) and choose “extend” instead of duplicate and apply.

  • Page 47: What To Do If Windows Calibration Does Not Start

    Calibrate again with the V-sense drivers and test the result. If the i3TOUCH is still not calibrated fully accurately, the problem might be related to your computer graphical card or its drivers that needs to be upgraded. 10 What to do if windows calibration does not start Sometimes the Windows calibration cannot run because the i3TOUCH is already calibrated with the V-sense driver.
  • Page 48 Follow the on-screen instructions. Tap on the i3TOUCH when the below instructions are shown on the display or press “enter” when you read the instructions on your computer screen only. With this step you identify the i3TOUCH as the touch screen to be used in windows. Finish with “escape”.

  • Page 49: Disabling "Usb Selective Suspend Setting

    Step. 11 Disabling “USB Selective suspend setting” Some customers experience that touch is lost after 15 minutes. This is because the i3TOUCH touch sensor is feeded by the power supplied from the USB-port of the computer and some computers have “USB selective suspend setting” enabled to save power. Go to Control Panel\All Control Panel Items\Power Options\Edit Plan Settings.

  • Page 50: No Touch After Installing The Driver

    If you don’t see 32 touch points, the driver is not running correctly. You might need a driver update. Check if you downloaded the latest drivers on the website and if so, contact i3 support. i3TOUCH 04 FHD T10 USER MANUAL...
  • Page 51 c) The “turn on fast start-up function” Some computers have a “turn on fast start-up” function to quickly boot. If that function is enabled, sometimes the touch sensor is not recognized at start-up or the touch sensor is recognized before the projector/display, which causes a conflict. Go to Control Panel\All Control Panel Items\Power Options. Choose “require a password on wakeup”...

  • Page 52: What To Do If You Can't Duplicate Your Screen

    HDMI-port is controlled by the graphics card and it is difficult to duplicate. When duplicating you see this instead of In that case you need to enter the control panel of your graphics card and choose duplicate or clone with laptop display. Below is an example of Nvidea: i3TOUCH 04 FHD T10 USER MANUAL...
  • Page 53 AUTHORISED DISTRIBUTOR WWW.I3-TECHNOLOGIES.COM INFO@I3-TECHNOLOGIES.COM...

Table of Contents