Table of Contents
Advertisement
d Setup
Date and Time
This setting specifies the date and time. If you remove the battery for more
than 5 minutes at a time, the date and time setting reverts to the initial setting
('98.01.01 12:00:00 AM). You must then reset the date and time.
Date:
Automatic calendar (two-digit display)
Time:
12-hour format (noon shown as 12:00:00 PM)
In the SETUP screen, select
1
"DATE/TIME"and press the
[MENU/EXE] button.
Press the [4] button until the
2
digits you want to set start
flashing.
• Each time you press the [4] button,
the flashing digits change as follows:
Year
Month
Minute.
3
Use the [5] or [6] button to
set the number.
4
When you have repeated
steps 2 and 3 and have set
the seconds, press the
[MENU/EXE] button.
• This completes the date and time
settings.
• The time display begins counting
from zero "00" seconds.
• The "SETUP" screen reappears.
Day
Hour
64
T
DISP
POWER
MENU / EXE
DATE [ 9 8 ] 0 1 . 0 1
T I M E 12:00:00 A M
<
O K
EX E
DIGITAL
POWER
MENU / EXE
T
DISP
POWER
MENU / EXE
>
Advertisement
Table of Contents
