JVC GC-S5 Instructions Manual page 57

Use the
3
select the image to be erased
and press the [MENU/EXE]
button.
• The confirmation screen appears.
• In step 1, press the [DISP] button to
select the image to be erased in the
same way as in 9-shot multi-frame
playback (aP.29, 53).
Press the [MENU/EXE]
4
button.
• The image is erased and the menu
screen reappears.
! CAUTIONS
• If "@PROTECTED FRAME" is displayed, the image cannot be erased.
- To remove the protection on that image: Switch to Protect mode (aP.76) to remove
the protection.
- To erase other images: In Playback mode (aP.42), select the images to be erased
and then go back into Erase mode to erase the frames.
Note that using any buttons other than the Mode dial when "@PROTECTED FRAME" is
displayed can cause a malfunction.
To Cancel Single-Frame Erase
In step 4, press the [6] button before you press [MENU/EXE] button.
5 To erase another frame,
repeat the procedure from
step 2.
[3] or [4] button to
ERASE
FRAME
ERASE
OK
57
< >
FRAME DSC00010
< > < >
EXE
< >
FRAME DSC00010
OK?
< > < >
EXE CANCEL