Datalogic Magellan 3300HSi Product Manual page 15

LED and Beeper Indicators — cont.
Table 2. Beeper Functions
BEEPER
INDICATION
Power On Beep Single beep
Good Read Single beep
Indication
Diagnostics Varies (see
for more information)
Programming Varies depending upon the feature(s)
Mode being configured.
Indications
Product Reference Guide
INDICATION
Error Codes on page 4
COMMENT
The Power-On Beep indication is a configurable feature which can
be enabled or disabled. When enabled, this beep Indicates the
scanner has finished all its power up tests and is now ready for
operation.
The good read beep indication is configurable. Options include:
Enable/disable, frequency, duration and volume. See the Product
Reference Guide (PRG) for more information.
The Beeper can provide diagnostic feedback if the scanner discov-
ers a problem during SelfTest.
The Beeper will sound as programming bar code labels are
scanned, indicating progress during scanner configuration.
LED and Beeper Indicators
7