Datalogic Magellan 3300HSi Product Manual page 11

USB Connection —
USB cable for the interface type you ordered. Reference
IBM Connection —
IBM cable. Reference
Keyboard Wedge Connection —
board Wedge cable has a 'Y' connection from the scanner. Connect the female to the male end
from the keyboard and the remaining end at the keyboard port at the terminal/PC. Reference
Figure 1
Figure 2. Ports and Connections
Product Reference Guide
Connect the scanner to a USB port on the terminal/PC using the correct
USB installations may require a power connection via an approved A/C
Adapter as shown in
the case if the scanner is connected along with a number of other devices
to a non-powered USB hub.
NOTE
Connect the scanner to the IBM port on the terminal/PC using the correct
.
Figure 1
Before connection, turn off power to the terminal/PC. The Key-
b.
1
2
3
1 Connection Bulkhead Cover
2 USB Service Port: On screen
programming tool
3 microSD Slot: Upgrades, imaging,
statistics data
4 Electronic Article Surveillance (EAS)
Antenna Connection Wire
.
Figure 1
b or c. For example, this would be
Figure 1 Figure 1
6
4 5
5 POS Terminal (blue): Label data, applica-
tion Host download, Host commands to
scanner
6 Auxiliary Port (yellow): RS-232 handheld,
EAS interlock, remote camera button,
PIR data
7 Cable Cover
Connecting the Scanner
7
3