Table of Contents
Advertisement
View Mode Selection
The Standard View mode displays a colour image on the LCD monitor, while the Quick View mode displays
a black-and-white image, but updates it more quickly to show the actual motion of the subject more
faithfully.
1
Make sure that the Power Dial is set to " ", " " or " ", then press the DISPLAY Button.
•Each press of the DISPLAY Button switches the screen as shown below.
Standard View mode
(colour display)
Standard View mode
A colour image is displayed on the LCD monitor
and is updated about 4 times a second. This mode
is suitable for shooting stationary subjects.
DISPLAY Button
Standard View with
Information Display
mode (colour display)
Power Dial
Lock Button
Quick View mode
(monochrome display)
Quick View mode
A black-and-white image is displayed on the LCD
monitor and is updated about 15 times a second.
This mode is suitable for shooting moving subjects.
• The image is stored in colour.
• The on-screen display is not available.
• When the shutter speed is set to 1/6 sec. or 1/13
sec., the Quick View mode is not available.
27
EN
Advertisement
Table of Contents
