Table of Contents
Advertisement
setup screen
To set the home position
1. Move to a desired start screen point and press [
The point will be set to the home position.
2. Click [
position.
To configure the swing settings
Swing is a monitoring function that moves between two preset points and enables you to
trace the motion.
1. Set <mode> in <Sequence setup> to
<Swing>.
The menu screen will switch to the
swing setting screen.
2. Select a swing setting mode.
• Pan swing : You can set the swing
monitoring using the PAN function.
• Tilt swing : You can set the swing
monitoring using the Tilt function.
• Pan & Tilt swing : You can set the
swing monitoring only using both PAN and Tilt functions.
3. Set <first preset> and <Second preset> to specify a swing range.
When moving to the second preset from the first preset, the camera will move to the right
`
J
direction on the screen.
If you set <Flip/Mirror mode> to <On> in the video setup, it will move in the opposite direction.
(Page 67)
4. Set the moving speed and dwell time.
5. Press the [
The first preset, second preset, speed and dwell time will be saved in set mode.
6. Press the [
It performs the swing operation.
7. Press the [
The running swing will be stop.
72_ setup screen
] in the home position. You will move to the predetermined home
] button.
] button.
] button.
].
Advertisement
Table of Contents
