Table of Contents
Advertisement
inSertinG/removinG a SD memory carD
Disconnect the power cable from the camera before inserting the SD memory card.
`
J
inserting a SD memory card
1. Open the cover in the rear of the camera.
(SNP-6201)
Using the screw driver, loosen 3 screws by turning
them counterclockwise and separate the dome cover.
(SNP-6201H)
2. Push the SD memory card in the direction of the
arrow shown in the diagram.
Do not insert the SD memory card while it's upside down
`
J
by force. Otherwise, it may damage the SD memory card.
English _35
Advertisement
Table of Contents
