Connecting To An Hdtv - Video Only - Arris AT&T U-verse VIP2250 Installation Manual

Connecting to an HDTV – Video Only
RF (75 Ohm)
connection
TO WALL
(VIDEO IN)
Video in
• Connect an RF coaxial cable to the cable wall outlet and the TO WALL (VIDEO IN)
connector on the TV receiver.
• If your HDTV has an HDMI input, connect an HDMI cable to the HDMI connector.
HDMI connection carries both video and audio signals.
• If your HDTV has a DVI input, you can use an HDMI to DVI converter to connect to the
VIP2250 HDMI connector.
• If your HDTV has component video, connect component video cables to the Y, Pb, and
Pr connectors.
DVI and component video carry video signals only. To connect the audio, refer to the
following page. To connect to a home theater receiver, refer to "Connecting to a Home
Theater Receiver – Audio Only. "
6
Component video
connection
eSATA
NETWORK
OPTICAL
Pb
Sample HDTV
Component
Video Input
Y
Pb
Pr
connection
L
Y
Pr
VIDEO OUT AUDIO OUT
HDMI
CABLE/
ANTENNA IN
VIP2250 U-verse DVR Receiver Installation Manual
HDMI
VIP2200
R
POWER
TO TV
HDMI USB
+12V
(VIDEO OUT)
Either / or
DC