Connecting To An Hdtv - Video Only - Arris VIP2102 Installation Manual

Connecting to an HDTV – Video Only
Either / or
Video in
• Connect an RF coaxial cable between the cable wall outlet and the TO WALL (VIDEO
IN) connector on the IPTV Receiver, OR connect a CAT5 Ethernet cable between the
network wall outlet and the NETWORK connector on the IPTV Receiver.
• If your HDTV has an HDMI input, connect an HDMI cable to the HDMI connector.
HDMI connection carries both video and audio signals.
• If your HDTV has component video, connect component video cables to the Y, Pb, and
Pr connectors.
Component video carries video signals only. To connect the audio, refer to the following
page.
VIP2102 High-Definition IPTV Receiver Installation Manual
RJ-45 (network)
RF (75 Ohm)
connection
connection
IP Network
Sample HDTV
Component
Video Input
Y
Pb
Pr
Component video
connection connection
Either / or
HDMI
CABLE/
ANTENNA IN
HDMI
5