Arris AT&T U-verse VIP2250 Installation Manual page 3

Dvr receiver
Table of Contents

Advertisement

At least
2 inches
2 inches
Follow these important safety guidelines when positioning and connecting your TV
receiver:
Do not block the slots and openings
Do not place anything on top of the TV receiver
Do not position the TV receiver in a confined space, such as an enclosed cabinet, that
does not provide adequate ventilation.
Do not position the TV receiver near any external heat source that could raise the
temperature around the unit. Do not place the terminal on top of another heat
producing electronic device.
Allow for adequate ventilation around the TV receiver to maintain normal operating
temperature. Do not place it in a sealed enclosure without providing for adequate
airflow.
Do not plug the AC power adapter into a switched power outlet.
A coaxial cable screen shield needs to be connected to the earth at the building
entrance per ANSI/NFPA 70, the National Electrical Code (NEC), in particular Section
820.93, Grounding of Outer Conductive Shield of a Coaxial Cable.
Because the receiver contains a hard drive, it must be positioned so that it remains
horizontal and rests on its rubber feet. Do not attempt to mount or position it in a
vertical position.
To allow the disk drive to spin down properly, wait at least 10 seconds after
disconnecting power before moving the receiver.
Always transport the receiver in its original factory carton, or in an equally well-padded
container.
Whether installed or being transported, do not expose the receiver to temperature
extremes. The temperature range for operation is from 0° to +40°C. The non-operating
(transport or storage) temperature range is from -40° to +60°C.
This manual includes the manufacturer's recommended safeguards and all the information
needed to connect your receiver to both your in-home IP network and your entertainment
system. The safety and installation information was developed and provided primarily by
the receiver manufacturer, ARRIS Enterprises, Inc.
VIP2250 U-verse DVR Receiver Installation Manual
V E N T I L A T E
2 inches
iii

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents