Sneaky Music Ds Installation - Linn SNEAKY MUSIC DS Installation And Setup Manual

SNEAKY MUSIC DS
INSTALLATION AND SETUP

7 SNEAKY MUSIC DS INSTALLATION

This section describes how to connect the Sneaky Music DS into a Linn hi-fi
system.
Unpacking
The Sneaky Music DS is supplied with the following:
• 2 x red, 2 x black BAF loudspeaker connectors
• mains lead
• 4 feet
• CD-ROM (contains system software, installation manual and owner's
manual)
We recommend that you retains all packaging in case you need to transport
the Sneaky Music DS at a later date.
Positioning
The Sneaky Music DS can be positioned almost anywhere, but please
consider the following points:
• The unit should be placed on a flat, stable and rigid surface.
• Allow at least 4" (10 cm) free space above and at each side of the unit
for air circulation.
• Do not position the unit where sunlight can shine (whether directly,
diffused or reflected) on its front surface as the infra-red (IR) radiation in
sunlight will be picked up by the unit's IR remote sensor and this can
adversely affect its operation. Similarly, some electrical devices such
as plasma TVs, fluorescent lights and energy saving lamps can
emit IR which can likewise affect the operation.
• For best performance do not stack the unit with other products. Ideally,
position the unit on a shelf by itself or, if proximity to other products is
unavoidable, positioning side-by-side is preferable to stacking.
• The unit should not be situated above, or directly adjacent to, sources
of heat such as radiators, other power amplifiers etc. Nor should it be
enclosed in a cabinet with such devices.
13
www.l i n n.c o .uk