Configuration Settings - Nokia 6230i User Manual

M e n u f u n c t i o n s
To set the lights permanently On, select Lights. Select
on for 15 seconds after a key press.
To automatically switch off the phone, select
automatically switches off approximately 20 seconds after you switch off the car
ignition, when the phone is connected to the full car kit.
To use the TTY/TDD settings instead of headset or loopset settings, select
Use TTY > Yes.

Configuration settings

You can configure your phone with settings that are required for certain services to
function correctly. The services are multimedia messaging, IM, synchronization,
e-mail application, streaming, push to talk, and browser. Your service provider
may also send you these settings. See "Configuration settings," page 10. For
information on availability and the appropriate configuration settings, contact
your network operator or service provider.
Select Menu > Settings
To view the service providers saved in the phone, select
settings. Scroll to a service provider, and select
that the configuration settings of this service provider supports.
To set the configuration settings of the service provider as default settings, select
Options > Set as default. To delete configuration settings, select Delete.
To activate the default configuration settings for supported applications, select
Activate default in all
To view the saved access points, select
point, and select Options
bearer, and GPRS access point or GSM dial-up number.
To add new personal accounts for various services, and to activate or delete
them, select Personal configuration
To add a new personal account if you have not added any, select
select Options > Add
required parameters. The parameters differ according to the selected service type.
To delete or activate a personal account, scroll to it, and select
or Activate.
56
> Configuration, and from the following options:
applications.
Preferred access
> Details to view the name of the service provider, data
settings.
new. Select the service type, and select and enter each of the
Automatic
Ignition detector > On. The phone
Default configuration
Details to view the applications
point. Scroll to an access
Add
Options
to set the lights
TTY/TDD >
new; otherwise,
> Delete