Nokia 6230i User Manual page 63

M e n u f u n c t i o n s
2. If you have already saved radio channels, select
channel you would like to listen to.
To select a radio channel location, briefly press the corresponding number keys.
Tune a radio channel
1. When the radio is on, select
0.05 MHz steps, or select and hold
Searching stops when a channel is found.
2. To save the channel to a memory location 1 to 9, press and hold the
corresponding number key.
To save the channel in the memory location from 10 to 20, press briefly 1 or 2
and the desired number key 0 to 9.
3. Enter the name of the channel, and select OK.
Basic radio functions
To turn off the radio, select
To save the radio channel you have found, select
See "Tune a radio channel," page 62. You can save up to 20 radio channels.
To set whether the visual radio application is used, select
Some radio channels may send text or graphical information that you can view
using the visual radio application.
To select the options for visual radio, select
whether the visual radio application starts automatically when you turn on the
radio, select Automatically.
To select the list of saved channels, select
a channel, or to enter the ID for a visual radio channel, scroll to the desired channel,
and select Options >
To listen to the radio in monophonic sound or in stereo, select
Mono output or Stereo
To enter the frequency of the desired radio channel, select
To listen to the radio using the loudspeaker or headset, select
Loudspeaker or Headset. Keep the headset connected to the phone. The lead of
the headset functions as the radio antenna.
You can normally make a call or answer an incoming call while listening to the
radio. During the call, the volume of the radio is muted.
When an application using an EGPRS or HSCSD connection sends or receives
data, it may interfere with the radio.
62
or
Options > Turn
Delete channel, Rename, or
output.
or
to change the radio frequency in
or to start the channel search.
off.
Options > Save
Options
Options > Visual radio
Options > Channels. To delete or rename
Visual service
Options
to scroll to the
channel.
> Visual radio.
sett.. To set
ID.
Options >
> Set frequency.
Options >