Heatrae Sadia ElectroMax User Instructions page 7

The electrical supplies should also be
switched off at the consumer unit Mains
Circuit Breakers (MCB's).
Never open the casing to the unit
without first disconnecting ALL
electrical supplies to the unit.
6.2 Central Heating system
If a radiator, any part of the underfloor
heating pipework, central heating pipe or
the boiler starts leaking turn the Central
Heating switch to the "Off" position (green
switch not illuminated). Open the lower front
panel of the Electromax and turn the central
heating isolating valves (see Diagram
below) to the off position. This will minimize
the loss of water from the system.
Central heating
isolating valves
6.3 Water Supply
If a cold water pipe supplying the
Electromax or a hot water pipe connected
to the unit starts to leak turn off the "Hot
Water" switch (green switch not illuminated)
and turn off the mains water supply to the
Electromax. Collect any water leakage in a
suitable container. Note: this water may
be very hot, take suitable precautions.
7.0 CONTACTS
When contacting Heatrae Sadia Heating
please have the Serial Number and Mod-
el Name to hand. This will aid us in deal-
ing with your query. This information
can be found on the data label located
on the front face of the water heater in-
sulation and can be seen when the front
panels are removed. DISCONNECT ALL
ELECTRICAL SUPPLIES WHEN REMOV-
ING ANY COVERS.
ADDRESS
Heatrae Sadia Heating
Hurricane Way
Norwich
Norfolk
UK
NR6 6EA
SERVICE
Tel:
Fax:
E-mail:
User's Instructions
0844 871 1535
0844 871 1528
heatraesadiaservice
@heatraesadia.com
7