Stand Alone Mode - Phonic Firefly 808 Universal User Manual

Stand-Alone Mode
The Firefly 808 Universal can work independently, without
any FireWire connection being established. The following
is just a couple of points of interest that you may need to
know to use the Firefly in stand-alone mode.
Firstly, whatever settings you have made in regards to
digital inputs, outputs, and sampling rates while using the
Firefly 808's mixer software will be kept even after you
restart the device and/or disconnect the FireWire /USB
cable. This means whatever inputs and outputs you have
set will be activated/deactived as per your previous set-
tings. The default sampling rate is 44.1 kHz, and the de-
fault digital input/output is S/PDIF.
Also, the analog inputs are routed to their correspond-
ing analog outputs, as well as a mix of these inputs be-
ing sent through any digital outputs that have been set
(ADAT, S/PDIF, etcetera).
18 FIREFLY 808 UNIVERSAL