Advertisement
BHM
8/1/13
NTV-Doc
12. Place the sub-board in the rear LCD housing like shown. This is how the sub-board will be installed
into the LCD housing, with the OEM Ford circuit board beneath the NTX54-Ford circuit board. The
harnesses from step 11 will be ran through the center square and connected to their prospective
connectors:
13. Run the harnesses from step 11
through the center square hole like
shown. When connecting the white plugs
to the circuit board, they can only be
inserted one way for proper operation.
Note the blocks on only one side of each
connector – this side faces down.
:
Agreement
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
9 |
P a g e
Advertisement
