Advertisement
BHM
8/1/13
NTV-Doc
6. Carefully separate the metal
bracket from the LCD housing,
this will expose the touch panel
ribbon cable and allow the LCD
screen to be separated from the
back half of the housing:
7. Now separate the
metal housing from the
LCD panel. Lifting the
opposite side of the
touch panel ribbon will
give you easy access to
remove the ribbon
connectors:
8. Disconnect the ribbons carefully with a small flat head
screwdriver. Set the LCD panel aside for now:
:
Agreement
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
7 |
P a g e
Advertisement
