Advertisement
5. You should now have access to the LCD screen. Remove (4x) 7mm screws, disconnect all
harnesses and bring the screen assembly to a clean, soft bench to prepare for
disassembly:
*WARNING: The following process is fairly involved. It requires disconnecting and adding ribbon
cables inside the LCD housing. If any ribbon cable is not seated firmly or squarely (perfectly straight),
it may result in improper functionality or a damaged screen.
*Note: Kits FV1 and FV2 are identical except for the screen disassembly and modification process. The
following instructions are for the FV2 (Escape).
1. To begin, place the LCD assembly face
down on a soft surface (ESD mat would be
best) so as not to scratch the screen.
Remove (4x) Phillips head screws:
:
Agreement
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
LCD Modification Process (Escape) *
BHM
8/1/13
NTV-Doc
5 |
P a g e
Advertisement
