If you do not use the batteries for long periods, remove them from the notebook. Never
i
store the batteries in the unit.
Removing and installing the battery
Only use batteries approved by Fujitsu Siemens Computers for your notebook.
!
Never use force when inserting or removing a battery.
Make sure that no foreign bodies get into the battery connections.
Removing battery
►
Switch the notebook off and pull the power plug out of the mains socket.
►
Close the LCD screen so that it locks into place.
►
Disconnect all cables connected to the notebook.
►
Turn your notebook over and place it on a sturdy, flat surface.
1
Inserting the battery
2
10600727428, edition 1
2
3
1
►
Push the battery lock in direction of the
arrow (1).
►
Slide the release button in the direction of
the arrow (2) and hold it in place.
The arrows are indicated on the buttons.
►
Remove the battery from the battery
compartment (3).
►
Push the battery into the battery
compartment until it engages (1).
►
Push the battery lock in direction of the
arrow (2).
Using your notebook
25