Removing And Installing The Battery - Fujitsu Siemens Computers AMILO Li Series Easy Manual

Removing and installing the battery

Only use batteries approved by Fujitsu Siemens Computers for your notebook.
Never use force when inserting or removing a battery.
Make sure that no foreign bodies get into the battery connections.
Removing the battery
► Switch the notebook off and pull the power plug out of the mains socket.
Battery
► Close the LCD screen so that it locks into place.
► Disconnect all cables connected to the notebook.
► Turn your notebook over and place it on a stable, flat and clean surface. If necessary, lay
an anti-slip cloth on this surface to prevent the notebook from being scratched.
1
Installing the battery
10600771542, edition 1
► Slide the battery lock (1) in the direction
► Remove the battery from the battery
2
► Push the battery into the battery
Working with the notebook
of the arrow and hold it in place.
compartment (2).
compartment until it engages.
Battery
25