Summary of Contents for Silent Call Communications Signature Series
Page 1
Signature Series 418 Mhz COMMUNICATOR™ RECEIVER INSTALLATION AND OPERATIONS MANUAL...
Page 2
The Communicator is a body worn battery operated alerting device that includes the Communication Port charger equipped with battery backup. It can be used with any Silent Call Signature Series 418 MHz transmitter. The transmitters available are the Sound Monitor, Telephone, Doorbell, Smoke Detector, CO Detector, Fire Alarm Transmitter, Door/Window Access, and Pressure Sensitive Door Mat and Bed mat.
Page 3
(If you are using a smoke detector or fire transmitter with the Communicator you must program these transmitters first or the supervision will not operate.) On the rear of the Communicator Port is a programming button used to program Signature Series 418 MHz transmitters to the Communicator Receiver. With the Communicator Port power switched on: ...
Fire Smoke Detector Supervision If the smoke detector or fire transmitter are activated or if there is a problem with the operation of either unit the fire Icon will blink 1 time if detector 1 is in fault, blink 2 times if detector 2 is in fault, blink 3 times if detector 3 is in fault and blink 4 times if detector 4 is in fault.
Page 5
Alarm Reference Chart: Transmitter Indication Sound Sound Icon in Orange Telephone Phone Icon in Green Door Icon in Yellow Doorbell Weather Icon in Red Weather CO Icon in Red Carbon Monoxide Fire Fire Icon in Red Smoke detector Fire Icon in Red Vibration Reference Chart SOUND = 3 short pulses...
Need help?
Do you have a question about the Signature Series and is the answer not in the manual?
Questions and answers