Silent Call Communications VIBRA-CALL 3 Installation And Operation Manual

Signature series 418 mhz

Advertisement

Quick Links

Signature Series 418 Mhz
VIBRA-CALL 3
RECEIVER
Signature Series 418 Mhz
INSTALLATION AND OPERATIONS MANUAL
VIBRA-CALL 3™ RECEIVER
INSTALLATION AND OPERATIONS MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VIBRA-CALL 3 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Silent Call Communications VIBRA-CALL 3

  • Page 1 Signature Series 418 Mhz VIBRA-CALL 3 ™ RECEIVER Signature Series 418 Mhz INSTALLATION AND OPERATIONS MANUAL VIBRA-CALL 3™ RECEIVER INSTALLATION AND OPERATIONS MANUAL...
  • Page 2 Model # VC4003-SS General The Vibra-Call 3 is a body worn battery operated alerting device that includes the Vi- bra-Call 3 Docking Port equipped with battery backup. It can be used with any Silent Call Signature Series 418 MHz transmitter. The transmitters available are the Sound Monitor, Telephone, Doorbell, Smoke Detector, CO Detector, Fire Alarm Transmitter, Door/Window Access, Weather, and Pressure Sensitive Door or Bed Mat.
  • Page 3 If using the optional Rubber Skin you can leave that on the receiver when placing into the Docking Port. • The Vibra-Call 3 Receiver will vibrate to let you know that it has been placed into the Docking port properly.
  • Page 4 Chart. Operation • When the Vibra-Call 3 receiver is in the Docking port and detects a signal from a Silent Call 418 MHz transmitter with a matching coding system, it activates the Docking Port’s bed vibrator and/or strobe light if connected.
  • Page 5 To recall the last received alert signal, press each of the six buttons on the top side of the Vibra-Call 3 receiver, one at a time. The receiver will vibrate only when you press the button that identifies which transmitter sent the signal.
  • Page 6: Erase Memory

    Erase Memory (Performing an erase will remove all learned transmitter codes from your Vibra-Call 3) • With the Vibra-Call 3 receiver in the Docking Port press and hold the program button on the Docking port. (see photo on page 2) •...
  • Page 7: Technical Support

    TTY) or by Email at technicalsupport@silentcall.com. Limited Warranty Your Vibra-Call 3 is warranted to be free of defects in material and workmanship for five years from the date of initial purchase. During that time, the unit will be repaired or replaced free of charge when shipped prepaid to Silent Call Communications.
  • Page 8 5095 Williams Lake Road Waterford, MI 48329 Phone 800-572-5227 v/tty www.silentcall.com...

Table of Contents