Silent Call Communications MyAlert WR101 User Manual

USER MANUAL
Wireless Multi-Alert Receiver
(Chime Unit)
Included DB100T
Doorbell Transmitter
Option Vibration Pad
Model #: VIB12B
1

MAINTENANCE

- For best results, use good quality alkaline batteries.
- Always replace old or weak batteries.
- Keep doorbell dry. If wet, dry immediately.
- Do not use cleaning solvents on electronic products.
- Solvents contain chemicals that can damage circuitry.
Use damp towel or cloth to clean. Dry immediately.
- Do not expose the bell unit to rain or immerse in water.
It is not water resistant.
If the device is operated using an AC adapter, use only the
MyAlerts approved power supply. Do not use any other type of
power supply.
WARNING
The user is cautioned that changes & modifications made to the
equipment without the approval of MyAlerts could void the user's
warranty.
The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this
equipment.
2
PARTS & FUNCTION DOOR BELL
Receiver
Strobe/melody switch
Volume control
Flasher
DC jack
Reset button
Zone ID
Mounting holes
Speaker
Melody
selector button
Zone selector button
Access Door
Battery compartment
Doorbell button
LED Indicator
Battery
compartment

MOUNTING

Receiver
Or
Mount on a wall
Place on a table

POWER

Receiver
or Uses a AC/DC
adaptor
- +
Uses 3 C-Cell
12V DC 400 mA
batteries
3
Vibration out
Vibration pad
ON/OFF switch
Indicators
Doorbell button
Doorbell housing
Doorbell Transmitter
or use foam adhesive
provided
Doorbell Transmitter
Uses 1 CR2032 Battery