Storing Readings; Reading Individual Measured Values - Extech Instruments 480836 User Manual

4-7 Storing readings

The meter includes a non-volatile data memory that can store a maximum of 99
measured values.
4-7-1 Storing individual measured values
MEM
The current memory location number appears in the lower right small display.
Once you press the MEM key, it will store a displayed value and increment the memory
location by one. Each flash of the "
stored. When the memory location number shows "99", to indicate the manual data
memory is full, the use must clear the entire contents of the data memory before storing
new values.

4-7-2 Reading individual measured values

Z
READ
X Y
MEM
Z
X Y
1. Press READ key, the display shows "
2. Press ▼ or ▲ key to select the desired memory location.
3. Press UNIT key to select the desired reading units.
4. Press MODE key to select the desired sensor axis reading.
5. Press MAX key to exit.
" symbol display indicates one reading has been
V/m
UNIT
R
READ
UNIT
A/m
R
"(reading mode).
16 480836 V5.0 8/09