Advertisement
Advertisement
Table of Contents
Related Manuals for Extech Instruments 407495
Summary of Contents for Extech Instruments 407495
- Page 1 User's Manual Heavy Duty Pressure Meter Model 407495...
-
Page 2: Warranty
Introduction Congratulations on the purchase of the Extech Heavy Duty Pressure Meter, Model 407495. This meter measures and displays pressure in eight (8) measurement units. Up to three (3) interchangeable transducers (sold separately) in varying ranges can be used with this meter. -
Page 3: Preparation For Use
3. Plug the new transducer into the meter’s input jack. Selecting the Unit of Measure Press the UNIT key to select the desired unit of measure: Bar, psi, Kg/cm , mmHg, inHg, O, inch H O, or Atmospheres (ATP). 407495 V2.1 11/2007... -
Page 4: Operation
95 / 98 / ME / NT / 2000 compatible software and a meter-to-PC interface cable can be obtained from Extech for use with this meter. The Part Number for the kit is 407001A. Instructions for use are supplied with the kit. 407495 V2.1 11/2007... -
Page 5: Specifications
Transducer only: ± 2% full scale Combined: ± (2.5% full scale + 1 digit) Accuracy note: Specified accuracy applies to meter at 23 C (±5 Calibration note: Re-calibration is not required each time a new transducer is attached. 407495 V2.1 11/2007... -
Page 6: Calibration And Repair Services
Product specifications subject to change without notice For the latest version of this User Guide, Software updates, and other up-to-the-minute product information, visit our website: www.extech.com Extech Instruments Corporation, 285 Bear Hill Road, Waltham, MA 02451 Copyright © 2007 Extech Instruments Corporation.
Need help?
Do you have a question about the 407495 and is the answer not in the manual?
Questions and answers