Attaching Audio Accessories - Entel HT446 Owner's Manual

1.4.1 ATTACHING AUDIO ACCESSORIES

Locate accessory connector cover marked "ACC". Lift cover and
rotate (screw) the connector clockwise.
SCMB
Figure 1. Attaching the accessory connector prior to use
Preparation prior to use
1. Attaching the belt clip. Align the belt clip with the plastic slots on the
rear of the battery pack. Slide the belt clip onto the battery pack, pushing
firmly until a click is heard.
2. BATTERY REMOVAL / ATTACHMENT
1. Turn the transceiver off.
2. Using a coin, rotate the battery screw anti-clockwise 2 or 3 turns.
**Ensure that you do not hold the battery pack when
unscrewing the release screw!
6
Note: The accessory socket is waterproof
without the ACC cover in place. However,
when not using an audio accessory we
strongly advise keeping the ACC cover
firmly pressed in its recess to prevent
foreign objects from getting into the socket.