DO NOT DISASSEMBLE OR MODIFY THE BATTERY IN ANY WAY! direction. Your Entel battery pack incorporates a safety circuit to avoid danger, if the safety Ensure you re-fit the accessory socket cover (the circuit is damaged or bypassed, or the battery cells are damaged directly, they radio is not submersible without the socket covered).
CONTROLS & INDICATORS NON DISPLAY 3 KEY LCD 8 KEY LCD 20 KEY LCD On/Off button: press and hold to turn the radio on or off. Red steady - Transmitting Volume control Red flashing slowly - Battery needs recharging Channel control Green steady - Receiving Push To Talk (PTT) button: press to speak and release to listen.
Page 4
When the transmission is finished release the battery by tightening the screw clockwise PTT button. by hand. (Do not use any implement or over tighten) (C). remove, unscrew locking screw anti-clockwise and pull the battery away from the top of the radio (D). www.entel.co.uk...
Cert no. ITS03ATEX21290X HT981, HT981S, HT983, HT983U, HT983S, HT983SU FPS-COM-Plus VA R-C Cert no. ITS11ATEX27318X All HT800 V2, HT900 V2 The Entel ATEX and IECEx transceivers should only be used with the specific, permitted accessories, as detailed above.
Page 6
CONTACT For more information about our products please contact us: +44 (0)20 8236 0032 info@entel.co.uk entel.co.uk All Rights Reserved. Copyright Entel UK Ltd.
Need help?
Do you have a question about the HT500 and is the answer not in the manual?
Questions and answers