Simple Mode (B Version) - Entel HT446 Owner's Manual

Lamp X
A momentary press of the X button will illuminate the LCD for
approximately 3 seconds.
Monitor button <>
The monitor button defeats any CTCSS or DCS tone programmed into
your HT446. In addition to radio etiquette the monitor facility is used to
listen to weak signals.
1.11 SIMPLE MODE
We understand that some users would find the commercial grade,
submersible construction of HT446 appealing but prefer not to have the
feature rich options offered by the HT446.
For these users you can set operation mode "B". The "B" version allows you
to enable or disable any of the key features, and fix CTCSS/DCS tones per
channel.
To access B version
1. Hold down the ENTER and UP buttons whilst turning the radio on.
Select version B using the UP or DOWN button. Press ENTER
to confirm.
2. Then hold down CALL and VOX and switch radio on. From here you
can enable or disable any of the features, you can also set the CTCSS
or DCS tone per channel. Once finished switch the radio off and on.
Those features selected will be fixed. Should you wish to change any
of the features fixed simply follow step 2 again.
Should you wish to return to mode A you need to follow step 1 to
and select mode A.
In B version, you are able to disable the monitor button. If you press the
"FNC" 9 times, the "nn" symbol is displayed. You can then select this feature
on or off.
15